Spring’s perfume

Hi everyone!

The warm sun has finally arrived to brighten up the last days, reminding me that spring will soon be here. I cannot wait to enjoy its colors and perfumes, the buzz of bees, the fragrance of hyacinths and colors of tulips. Being quite of an impatient person, I decided to start bringing the upcoming season in the home, by decorating a jam jar with decoupage, burlap and tiny flowers, creating a potpourri holder in which I placed fragrant lavender seeds.

This creation is quite simple and extremely enjoyable to make. If you want to bring spring in your home too, here are some little instructions for crafting your own.

Materials:

• Jam jar
• Glass Primer
• A background image (optional) (I used Calambour’s mulberry paper PAU36)
• A lavender graphic (I got mine from Calambour paper EASY292)
• Decoupage glue (Mod Podge should be ok)
• Clear sealer
• Burlap
• Tulle (optional)
• Decorations (flowers, ribbons, lace…)
• Lavender seeds

First of all, you need to apply a coat of glass primer on the entire surface. Once it dried, I tore small pieces of background mulberry paper and glued them sparsely using decoupage glue (picture 2). I let the piece dry, and then added the lavender graphic, before applying 4 coats of clear sealer in order to protect the creation (you can apply less, but I figured out that the inside will get dirty with the seeds, so I might want to clean it sometimes and I should make sure water would not damage the decoration).

I then filled the jar with lavender seeds, and, instead covering with the cap, which would prevent the perfume from spreading around the house, I cut a burlap circle (you should leave about 1 inch of margin on each side) and a tulle one of the same size.

I brushed decoupage glue on the perimeter of the burlap to prevent the fabric from faying and I layered it on the top of tulle. I then fixed it with ribbons and lace around the top of the jar. The little trick is to do this before the glue dries. In this way, you will be able to shape the fabric with your fingers, creating even waves all around the top and the burlap’s perimeter will harden in the right position, so that when you will have to remove it in order to change the seeds inside, it will keep its shape.

Lastly, you can decorate the front as you wish: I added ribbons, al small clay rose and a fake purple flower, matching the shade of the design on the decoupage paper.

And here is my final piece! It really brought a bit of color and perfume in my life and I hope it will do the same for you! I hope you enjoyed this little tutorial :-)

Have a wonderful day!

My favorite parties: Under the Table and Dreaming -  Between Naps on the Porch - Dwellings - Creatively living - The dedicated house - Rain on a tin Roof - Its So Very Cheri - DIY Showoff - The Stories of A2Z - Coastal Charm - A Stroll thru Life - My Uncommon Slice of Suburbia - Stone Gable - Cozy little house  - Knick of time -Savvy Southern Style - Ivy and Elaphants - Green Willow Pond - No Minimalist Here - From my front porch to yours - Craftberry Bush  - The Brambleberry Cottage - French Country Cottage - Common Ground - The Charm of Home - The shabby nest - Romantic home - Sunny simple life - The cottage market

P.s. If you don’t want to miss any crafty project, remember to follow the blog by clicking on the “join this site” button in the right column ;-)

Lovely puffy hearts

Hi everyone!

S. Valentine’s day is approaching (I am sure, no one was aware of that!), so today I want to share a little, quick project, which is easy to make and would be a nice present for your loved ones (or maybe for yourself ;-) ).

It’s a cute stuffed heart, which you can easily personalize in so many ways! I will give you all the options I could come up with at the end, but first of all, here are the instructions!

Materials:

• Fabric
• Stuffing material
• Needle
• Thread
• Scissors
• Ribbons and other decorations

Preparation: cut two pieces of fabric (I used cream felt and checkered cotton) to create two heart shapes of the same dimension. You can chose the size, just remember to leave about 1cm of margin, which you will use to sew them together. Also consider that, when you add stuffing, the size will be reduced. Cut a smaller heart in a fabric that complements (or contrasts) the one you will use for the front (I chose red felt). You can, of course, draw your templates in the shapes and dimensions you wish, but if you want, you can also download the ones I created here.

• Pin the small heart at the center of the one you wish to use as front (picture1)
• Using a thick thread in a contrasting color, sew by hand all around the perimeter (picture 2). The advantage of using felt for the heart on top is that it will not fray.
• If you want to be able to hang the little cushion, pin a ribbon to the fabric you will be using for the back (picture 3). It is very important to pin it correctly, otherwise you will find it in the wrong place once the piece is finished: first of all, fold the ribbon in half. Now, keeping the ends well aligned and on top, pin it to the FRONT of the fabric (the side that will be on the outside of the heart). Leave 1/1.5cm of ribbon ends, so that, once you hang the heart, the ribbon will not fray. Remember to avoid placing the pin too close to where you will be sewing, mostly if you plan on using a sewing machine).

• Now, align and pin the two hearts together. It is very important to keep on the inside the surface of the fabric that will in the end be on the outside (on other words, the two sides you want to see will now face each other). If you pinned the ribbon, it should now be in between the hearts (picture 4).
• Sew around the perimeter (you can use a sewing machine), leaving about 1cm margin and an opening on one side (you will need it to flip the heart). I like to leave open a segment which is about 1/3 of the straight line starting from the tip (picture 5).
• Remove the pins and gently turn the heart inside-out. In my opinion, the best way is to start pushing the opposite side through the opening and then slowly roll all the rest of the fabric (picture 6).

• Stuff the heart from the opening (picture 7).
• Close the opening with a thread in a matching color (picture 8).
• And here is your finished heart, ready to be hanged or further embellished :-) ! (picture 9)

Aside from varying the size and shape, or the fabric type and color, many interesting adaptations can be done:

• You can embellish the heart with flowers, ribbons, buttons… (you can find video tutorials for crocheted flowers here and a pattern for a simple one here).
• You can scent the creation, by adding lavender to the stuffing (in this case, you can keep the little puffy cushions in your home or wardrobe as air fresheners) or, for a very personalized S Valentine’s day present, you can spray you cologne on it.
• You can add embroidery on the little heart on the front, or, in the case of a present, when you are sewing, in step 2, you can leave the top open and use it as a pocket to insert a love message.
• The small hearts also be very nice Christmas ornaments

Here are some of the ones I made. I hope you enjoyed the tutorial, and, if you have any other ideas on the use of these little fluffy creations, please let me know!

I wish you a lovely day!

Featured on:

My favorite parties: Under the Table and Dreaming -  Between Naps on the Porch - Dwellings - Creatively living - The dedicated house - Rain on a tin Roof - Its So Very Cheri - DIY Showoff - The Stories of A2Z - Coastal Charm - A Stroll thru Life - My Uncommon Slice of Suburbia - Stone Gable - Cozy little house  - Knick of time - Savvy Southern Style - Ivy and Elaphants - Green Willow Pond - No Minimalist Here - From my front porch to yours - Craftberry Bush  - The Brambleberry Cottage - French Country Cottage - Common Ground - The Charm of Home - The shabby nest - Romantic home - Sunny simple life - The cottage market

P.s. If you don’t want to miss any crafty project, remember to follow the blog by clicking on the “join this site” button in the right column ;-)

Aphrodite bracelet by beadsmagic.com

Hi everyone,

Today I want to share with you a quick pattern. I found this beautiful bracelet on Pinterest and I quickly pinned it onto the FREE patterns group board for future reference. Today, however, a pinner signaled that the picture had a dead link (I hate daed links, so thank you very much!).

I looked for the original pattern on beadsmagic.com, where it was first published, but I could no longer find it. I therefore tried to figure out how to make this little beauty, and here is my interpretation of the pattern. I’m sorry it is not very detailed and professional, but since the creation is not mine, I don’t have many pictures and I do not want to take possession of an idea that was not mine.

Here are the quick instructions and the diagram below should be of help to understand the direction of the threads (if something is not clear, please leave a comment to the post):

• Row 1: RAW with 2 needles technique, creating picots of 4 seed beads: for each thread add 1 6mm fire-polished bead, 4 size 11/0 seed beads, pass again through the first size 11/0 in the same direction as before, add 1 6mm fire polished, repeat for the other thread and then cross the 2 threads in a size 11/0 (repeat for the entire length of the bracelet)
• Row 2: pass through the top seed beads of the picots formed in the previous round, adding 1 seed bead, 1 6mm fire-polished bead and another seed bead between one bead and the next.
• Row 3: pass through the previous round, adding picots exiting from the top beads of round 1 picots

Personally, I would use a thicker thread for the first round, since the beads are heavier and you pass through them only once. I hope you will have fun making this wonderful bracelet, and thanks to beadsmagic.com for creating and sharing the image!

Have a lovely day!

P.s. If you don’t want to miss any crafty project, remember to follow the blog by clicking on the “join this site” button in the right column ;-)

Decoupaged vintage ornaments

Hi everyone!

Christmas is almost here and I am so excited! These days I had such a great time crafting the last decorations, while listening to Christmas songs, and today I finally completed my tree adding some final ornaments.

The steps I used to complete these little creations are the ones of sphere 1 that you can find here, but this time, instead of buying decorative paper with the manufacturer’s graphics, I had my own designs printed (yayyy!!!!)

It was such a long time I wanted to do it! Each time I visited Graphics Fairy’s website, I was amazed by the gorgeous vintage images she was posting and I kept imagining them decorating my tree. A couple of weeks ago, I decided it was time to stop dreaming and start doing!

First of all, I downloaded 3 beautiful graphics: a cute elf girl, a sweet cat and a lovely dog. I then I cut, resized them, and modified saturation and brightness in order to unify the designs. I also added a common background and small decorative leaves in front of every image, before cropping them in the shape of a circle, so that they would fit on my Christmas plexiglass baubles.

I was able to get everything printed by Calambour, a company located here in Milan that produces mulberry paper. Personally, I really like the job they did: images are crisp, the result professional, and people at their office very helpful, so I will ask them again if I will need more printing. If you wish to print by yourself however, you could use regular paper or try the steps of this tutorial to print on mulberry paper with your inkjet printer.

And here are my beauties! I love how I was finally able to get those gorgeous graphics on my tree…everything turned out just as I wanted (and I am happy, happy, happyyyyy!!!).

I wish you a lovely day and joyful holidays!

P.s. If you don’t want to miss any crafty project, remember to follow the blog by clicking on the “join this site” button in the right column ;-)